my access point mounted on the ceiling worked fine. however, i was in the ruckus settings and tried to turn off the 5ghz button AP, and leave the 2.4Ghz on. however, when i toggled 5ghz off, it toggled 2.4ghz off as well. and i no longer could connect via wifi (obviously since both radios turned off instead of one radio). So, I cant seem to turn them back on. I connected ethernet cable to the R510 and my laptop. it gave me internet, but CANNOT login to the https;//192.168.0.1 it wont connect. but i do have internet access confirmed. what do i do to get the wifi radios turned back on? do i have to reset the AP? or another method? thanks
We can try accessing via IP address ( logical address that your router assigns to network devices, so the default 192.168.0.1 does not work ) to the unleashed Dashboard via URL basically we have to do an IP scanner ( since your Access Point got an IP address from your local Router ) on the network once we locate the IP of one of the Access Points, copy and paste it into the URL and it should redirect us to the login admin page to activate the network again.
How to find my Ruckus “Devices IP address” using free applications