Orange lights

[Gbunch702]

Have orange lights on 5g and 2.4 on extender and need to reset

[Imran_ruckus]

Hi @Gbunch702 

Thank you for the response.

Like I mentioned in my previous response amber lights on the 2.4G or 5G radios indicate normal behavior and doesn’t need a reset.

When 2.4G or 5G LEDs are amber, it means that the radios are active, but there are currently no devices or clients connected. Once a device connects to either the 2.4G or 5G network, the corresponding light will turn green.

For more details on the LED status indicators of the RUCKUS R510 Access Point, please refer to the link below:
https://docs.commscope.com/bundle/unleashed-200.14-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

Thank you again for your patience and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[Imran_ruckus]

Hi @Gbunch702 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[Imran_ruckus]

Hi @Gbunch702 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[Imran_ruckus]

Hi @Gbunch702 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support