No power to AP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-24-2022 07:35 AM
- I have a ruckus switch ICX 7150-C12P. The power went out and rebooted it. I am now left with the switch having a lit up amber light on syst and a green on power. I have tried repowering the modem and the switch itself. I have also reseated all cat 5 cables to and from the switch and the AP’s. The AP’s currently have no power since the switch is POE. Does anyone have a solution to get the switch to resend out internet signal to the AP’s?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-26-2022 05:36 AM
Hello
It seems that you have to perform a software recovery.
Symptoms:
*The Switch will not provide power to any PoE devices (Doorbell, cameras, even the Access Points).
*Will not have connectivity to the devices connected to the Switch.
*The ISP router will work fine.
*Console access will be the only access available.
*System light will be yellow/orange/Amber.
Please follow the link below to be able to recover your switch:
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-27-2022 07:40 AM
I've tried this and no luck.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-27-2022 07:45 AM - edited 12-27-2022 07:46 AM
Hi @AmandaO
Please provide an image where you are trying to connect via console. ICX 7150 - C12 P (USB type C to USB ) PC .
Best Regards
Fernando Vasquez

