03-04-2025 06:36 PM
Hi, my ruckus has not been operational for about a month. Can you please help me get a replacement?
03-28-2025 07:15 PM
Thank you. This is what is showing on the wap. The 5G is amber and the pwr light flashes green
03-31-2025 06:13 AM
Hi @mnoone10 ,
Thank you for the response and sharing the pictures.
Before we can help, we need to check few configurations on the Switch.
Please follow the below steps and help us with the queries,
1) To check this, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P
I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.
How to find the IP Address of the RUCKUS Devices (Switch and APs) using IP Scanner free applications:
2) Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”
If you can access the Command line should look like this:
ICX7150-C12 Router> OR
ICX7150-C12 Switch>
Please enter the below commands once you log in to CLI and share the output.
Note: Hit Enter to accept each command
enable
show version
show flash
show inline power
show inline power detail
show interface brief
Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.
Thank you again. We appreciate your patience and understanding.
Best regards,
Pinky Rajendran
RUCKUS Lennar Home Community.