RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
12-03-2022 08:33 AM - edited 12-03-2022 08:56 AM
Hello,
I had a power surge a few weeks ago and since then the Rockus network disappeared and I cannot login to the app since im not connected to the network.
The connection point lights are green as well as the ones that say “STAT”, “SYST” and “PWR”
How can I get access to the network and app again? I had to reconnect all my devices to my AT&T gateway but it doesn’t cover my whole house.
12-05-2022 08:47 AM
Hi @Katalina86
If you have the next Symptoms: Websites not loading,devices getting disconnected or having problems working as intended, Network dropping at random points in time, Smart devices not being able to connect to the internet and unleashed dashboard sometimes as “Disconnected” on the Internet tab, please follow up the next guide:
Note: to find the IP address of the Switch that is necessary to follow the guide, you must be online as well as the Switch, so the Switch must be connected to the ISP router (as it was in case you disconnected the cables, connect them again) and you must connect to the ISP router wirelessly or by cable.
How to Fix Routing code issues on Lennar Home users via Web GUI.
Best regards,
Yarenis Hernández
Technical Support Engineer | L2 TAC Wired
