11-03-2022 06:25 PM
I have seen many related posts of people losing internet after a power outage. The response have advanced technical information. I need help to restore my internet step by step from the moment I log into the computer.
Thanks
11-07-2022 06:25 AM
Try to flash the switch boot image using USB (assuming you don't have network access) and that should fix the issue.
11-05-2022 10:14 AM
That guide you link is a little tricky.
when I run pintenv I get the IP address of my Gateway. so I'm unclear how to proceed
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2022.11.05 11:55:40 =~=~=~=~=~=~=~=~=~=~=~=
ICX7150-Boot>printenv
baudrate=9600
ipaddr=192.168.1.1
uboot=mnz10115.bin
ver=10.1.15T225 (Jan 30 2019 - 23:08:47 -0800)
Environment size: 99/16379 bytes
ICX7150-Boot>
11-05-2022 10:58 AM - edited 11-05-2022 10:59 AM
Hi @renotse
Here is the official guide
and Here is video link : https://www.youtube.com/watch?v=Ql22blH_CGo
Basically in simple words the TFTP server ( server it would be your PC ) the IP address '192.168.1.1' is your switch so you have to match this addressing between your PC-ICX to preform the software recovery
Like PC to have 192.168.1.2 and ICX switch 192.168.1.1 since they are under the same addressing range they can have connectivity and preform the software recovery .
You can omit the Gateway address if the connecting is PC to ICX
Best Regards
Fernando Vasquez
11-09-2022 07:44 AM
Thank you,
I was able to recover my ICX7150 and reinstall the software from files I have from a previous upgrade.
My desire now, is to upgrade the software to the most current and stable version. I would like you to guide me in the file selection and upgrade method. (there are lots of file options on the download page for my switch)
I have read this guide and plan to use it.
How to Upgrade a Switch ICX-7150-C12P using a USB flash drive
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...
I'm confused if I need to to the intermediate upgrade or if I am able to go straight to the latest recommended version.
I am able to ssh into my ICX7150 and here is partial output from "show version" command
SSH@ICX7150-C12 Switch>show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
(28660224 bytes) from Primary SPS08090d.bin (UFI)
SW: Version 08.0.90dT211
Compressed Primary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 03:08:55 2019
HW: Stackable ICX7150-C12-POE
11-09-2022 08:09 AM
P.S. I am confused by this detail. I had 2 files to choose from when I reinstalled SPS08090d.bin or SPS08090dufi.bin. I chose SPS08090.bin, but my "show version" output refers to SPS08090d.bin (UFI).
Please elaborate on the difference in the UFI version