cancel
Showing results for 
Search instead for 
Did you mean: 

ICX7150 switch will not power up

TX_Wattz
New Contributor

My Ruckus ICX7150 has stopped working. I've followed the forum diagnostics to no avail. When powerup, the amber lights will flash for a second and then nothing afterward. Have tried to reset multiple times and even connect via computer, and it's definitely not powering up.

6 REPLIES 6

Jayavidhya
Moderator
Moderator

Hi @TX_Wattz 

 

Greetings of the day,

 

Please let us know the LED status of the switch and the access points using the below guide.

 

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498...

 

 

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D...

 

 

Please let us know if you have any queries in this regard.

 

Best regards,

Jayavidhya

Lennar Home Community

Hello, the two R510 access points have no lights due to no PoE from the ICX switch. The ICX switch is plugged in, but no lights. I checked the AC outlet, it is working and powering other devices.

Hi @TX_Wattz 

 

Please share the image of the switch and the access points showing the LED status and the cable connections.

 

Here is where you can upload the image/photo :

 

you can also drag it to the chat

 

Please let us know if you have any queries in this regard.

 

Best regards,

Jayavidhya

Lennar Home Community

Here is the ICX switch with the power Ruckus ICX.jpgRuckus AP downstairs.jpgRuckus AP upstairs.jpgcable and two network cables to the R510s. As you can see, there is no LED lights even on the ports.