06-23-2023 04:05 PM
We lost power both APs aren’t receiving power after power returned. I have Reset all items several times APs and switch. I have switched cables where possible. I have attempted reboot using coms port that didn’t accept a boot load, flash attempted but failed. Boot said invalid. Not sure what I could do here.
07-03-2023 06:12 PM
Also the 2nd of the 2 AP says that it is disconnected
07-04-2023 08:15 AM
Hi @akalala
Greetings!!!
Thank you for the response and the information you shared.
Could you please let me know if you have Upgraded your Switch to the latest recommended version as mentioned in my previous post?
Please confirm and let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
07-04-2023 12:48 PM
Yes I believe I was able to updated yesterday
07-04-2023 12:51 PM
Hi @akalala
Thank you for the response and the update.
Could you please share the output of the below commands from CLI?
enable
show flash
show version
show inline power
show interface brief
Please let me know if you have any queries in this regard.
Thank you again for your patience and understanding.
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
07-05-2023 05:18 PM
Pics to follow