ICX 7150-C12p not powering r510s

[BusyReading]

The PoE has failed for my ICX switch box. I've tried restarting the box, powering it down, replacing the r510s, and etc. However, the same problem persists. I have the yellow system light on, and I can't connect to my access points.

[BusyReading]

Yes I'm with the Lennar Homes 🙏

[Chandini]

Hi BusyReading 

Ack and Noted. Thanks for reverting back to us. 

I have attached a link below that will help you to console to the switch and access switch CLI using putty . Follow the steps in case you are facing an issue . Please upload the picture of the image to this post . 

Link : 

• https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

After you are able to access the switch using CLI. Please share the output of below commands. 

• Show inline power 
• Show poe detail 

If you facing any issue or seeing a error when you follow any steps in the link. Please upload the picture of the error using the below option 

Also please upload the picture of front panel of the switch using the above option . 

I hope the above steps help you. 

Thanks