I have an ICX 7150-C12 that should be viewable in unleashed. Unleashed sees the switch enough to auto populate its info (MAC, IP, Model/Name), but is unable to complete the connection. It only shows failed to ping ICX [IP ADDRESS]. Suggest checking network.
I have reset the switch multiple times, upgraded the firmware, and tried everything I could find online before resetting once again. I am able to ping the IP through windows cmd.
I would like to know if you are Lennar home user , since some times the switch is running routing code (SPR08095d) (L3) and for this type of setups and configuration , it has some troubles for the connectivity for home users.
As I can see you are having troubles adding the ICX to the unleashed dhabsoard, I will share with you some guides to follow up
1-Made sure that the ICX is in the same subnet as the APs run a
That's fantastic, thank you for the guides! I'm hoping to get into this again this weekend, though that might not happen.
And yes, it's a lennar house. One of the first things I did was update the firmware and change it over to the sps set up. (that was... Stress inducing. I have understood the theory to do that sort of thing, but doing it was new.)