02-21-2022 12:25 AM
Good day.
I have an ICX 7150-C12 that should be viewable in unleashed. Unleashed sees the switch enough to auto populate its info (MAC, IP, Model/Name), but is unable to complete the connection. It only shows failed to ping ICX [IP ADDRESS]. Suggest checking network.
I have reset the switch multiple times, upgraded the firmware, and tried everything I could find online before resetting once again. I am able to ping the IP through windows cmd.
Any help or guidance is appreciated. Thank you.
02-23-2022 03:15 PM - edited 02-23-2022 03:27 PM
Hi @leonox
Hope you are doing well!
As I can see you are having troubles adding the ICX to the unleashed dhabsoard, I will share with you some guides to follow up
1-Made sure that the ICX is in the same subnet as the APs run a
ICX7150-48P #show ip address
2-Unleashed side:
3-ICX configuration and steps:
4-Please ping the ICX from the unleashed dashboard I believe is in
Admin & Services > Administer >Diagnostics> Network Connectivity page.
Some tips I can give you is to run the following commands:
ICX7150-48P (config)#Crypto key generate
Example:
ICX7150-48P (config)#Username admin password admin
ICX7150-48P (config)#aaa authentication login default local
Then in the unleashed dashboard you have to go to switches and use the same credentials you ran as the example admin/admin
I hope this helps !!
07-16-2023 06:07 PM - edited 07-16-2023 06:09 PM
@Vásquez_Fer wrote: I would like to know if you are Lennar home user, since some times the switch is running routing code (SPR08095d) (L3) and for this type of setups and configuration , it has some troubles for the connectivity for home users.
THIS! Thank you so much for mentioning this. I was unable to find my issue until I saw your comment and installed SPS firmware code without (L3) features, and it works perfectly.
For anyone looking, symptoms were that the Unleashed device could not ping the Ruckus Switch, and the Ruckus Switch could not ping anything on its own subnet. Installing the SPS firmware did the trick - thank you so much!
07-17-2023 03:14 PM
Hi @smittyva
Greetings of the day!!!
Thank you for the feedback and the information on this issue.
Great!!! Good to know that the issue is now resolved.
Thank you again for contacting RUCKUS Lennar Home Community and feel free to contact us for future queries.
Have a great day ahead!!!
Best regards,
Imran Sanadi
RUCKUS Lennar Home Community.
07-31-2023 07:09 AM
I'm having the same issue, and your second link is broken.