I lost power briefly and all my WAPs have stopped working, No power

[Pantwi]

I lost power briefly and all my WAPs have stopped working, they don't have any power. I have searched for different solutions on this forum but have not had any success so far. Please help

[Vineet_nejwala]

Hi @Pantwi 

Is this a Lennar setup ? If not do you know if these APs are unleash or managed by any other controller ? Assuming these are Unleash you can try setting the wifi again following below ?

https://www.youtube.com/watch?v=z4zbJcBSuuw&t=91s

https://www.youtube.com/watch?v=vFD_ByQWGH0

Best Regards

Vineet

[Pantwi]

Yes, this is a Lennar setup.

[Vineet_nejwala]

Hi @Pantwi 

Let me route this case to Lennar support queue.for further assistance. 

Best Regards

Vineet

[Imran_ruckus]

Hi @Pantwi 

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I could understand that your RUCKUS setup is not working, and Access Points do not have power.

Could you please let us know the answers to the below queries to assist you better?

1. Was this working before or is it a new installation? If it worked before, was there any power outage before you started facing this issue?

2. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

3. Is your Internet Connection from the Internet Service Provider (ISP) stable and working? (You could check this by connecting to your local router Wi-Fi or from an ethernet cable from Router to a laptop/PC).

4. May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.