cancel
Showing results for 
Search instead for 
Did you mean: 

How to Reset Lingering, Old SSIDs (Old thread unresponsive)

Roger_Carvalho
New Contributor

Hello,

Please see prior thread here (https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/How-to-Reset-Lingering-Old-...) which went unanswered, hence I am posting here for further assistance.

The last message I received was from @sanjay_kumar as follows:

"Hi @Roger_Carvalho 
Please follow the below instructions:
1. Connect the Laptop to the SSID.
2. Open the browser and enter the APs IP or URL https://unleashed.ruckuswireless.com
3. Enter the credentials of admin users.
4. Go to  Admin & Services -> Administration >> Choose Local Upgrade >> Upgrade >> Select the firmware version 200.14.6.1.199 and upgrade.

The complete instructions is there in the below link"

I responded:

"As to item No. 3, to my knowledge, I have never set up any credentials for admin users when the smart home was set up for my household.  What should I do?"

My question above is still pending, please advise.

Sincerely,

8 REPLIES 8

syamantakomer
Community Admin
Community Admin

@sanjay_kumar could you help here.


Syamantak Omer
Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI

RUCKUS Networks, CommScope!

Follow me on LinkedIn

Roger_Carvalho
New Contributor

Hello,

@sanjay_kumar @syamantakomer - Following up on this, again.  Please advise.

Sincerely,

Hi @Roger_Carvalho 
On the step 3, can you try using the either of the below username\password and see if you can login?
admin\sp-admin
super\sp-admin

I have tried both combinations but it did not work.  Any ideas?

Sincerely,