How can i get the Configure.Me to come up in my wifi connections so i can set up the unleashed?

[alejandro_rial]

I started the unleashed app process and had to stop half way thru and now the Configure.Me wifi network doesn't appear. I already contacted customer service a couple of times and watched the youtube videos and nobody can explain how to fix it. Help please

[gerald_walsh_96]

No

[andrew_giancol1]

I personally don't use the "configure.me" ssids when administrating new setups. I prefer to reference the IP's of the system directly. My thought here is that you should be able to reference your Router's DHCP table and match up the IP addresses if you get stuck, I would just try https:// IPs you find> until you get a positive hit(I.E https://192.168.1.252)
I hope that helps, otherwise, is it broadcasting ANY ssid's?(WLAN)

[andrew_giancol1]

You can also try using a program like NMAP! 
a command would look like so
nmap -vv -PN -A -p443 192.168.1.0/24
My output looks like this:
Scanning 256 hosts [1 port/host]
Discovered open port 443/tcp on 192.168.1.1
Discovered open port 443/tcp on 192.168.1.119
Discovered open port 443/tcp on 192.168.1.102
Discovered open port 443/tcp on 192.168.1.103
Discovered open port 443/tcp on 192.168.1.254
Discovered open port 443/tcp on 192.168.1.253
Discovered open port 443/tcp on 192.168.1.252

You can stop here, or wait for the -A part to do its job. The full output look like this:
Notice the SSL-Cert or the HTTP-TITLE that's the give away!

[gerald_walsh_96]

Does that involve hooking up directly to the 510's ethernet port?

[andrew_giancol1]

I would try a port on your 7150ZP