cancel
Showing results for 
Search instead for 
Did you mean: 

Firmware Upgrade for ICX7150-C12 Switch - Need help locating Firmware version and help upgrading

MiSNemesis
New Contributor

I have a ICX 7150 since 2020 and was never upgraded.  I am at a lost as to how to locate the version and then what upgrade is necessary to use.  Any help would be appreciated.

1 ACCEPTED SOLUTION

Jayavidhya
Moderator
Moderator

Hi @MiSNemesis 

 

The recommended firmware version for ICX 7150 Switch is SPS08095dufi.bin 

 

Please follow the below guides to perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin to avoid the issues in future.

 

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

 

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

 

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

 

 

Please let us know if you have any queries in this regard.

 

Best regards,

Jayavidhya

Lennar Home Community

View solution in original post

36 REPLIES 36

MiSNemesis
New Contributor

08.0.90BT211 (SPS08090d.bin) - I found this Compressed Pri Code version.  This was under Compressed Sec Code 08.0.90BT213 (SPR08090d.bin)

MiSNemesis
New Contributor

Jayavidhya
Moderator
Moderator

Hi @MiSNemesis 

 

The recommended firmware version for ICX 7150 Switch is SPS08095dufi.bin 

 

Please follow the below guides to perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin to avoid the issues in future.

 

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

 

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

 

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

 

 

Please let us know if you have any queries in this regard.

 

Best regards,

Jayavidhya

Lennar Home Community


SSH@ICX7150-C12 Switch#show ver
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Sep 22 2019 at 23:54:26 labeled as SPS08090d
(28660224 bytes) from Primary SPS08090d.bin (Non-UFI)
SW: Version 08.0.90dT211
Compressed Primary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 03:08:55 2019

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X10GR POE 12-port Management Module
Serial #:FEK3203P15K
Software Package: BASE_SOFT_PACKAGE
Current License: 2X10GR
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 121 day(s) 20 hour(s) 55 minute(s) 13 second(s)
The system started at 06:39:31 GMT-05 Sat Mar 11 2023

The system : started=cold start

================================================================================ ======
=============== WARNING: FI image is not booted from UFI!!! ========= ======
====== Please download UFI image and reboot the system for full functionality ======
================================================================================

 

 

Not sure what to do here now.