Ethernet not working and slow 2.4g

[dewell_fears]

I am having an issue with my access point. I have a flashing yellow light on far left for the 5g, with a green light next to the yellow one and the two far right ones. The middle light is off. Also, my ethernet ports throughout the house are not working. I have been running speed tests that seem to be fine for the 5g but the two 2.4g are running very slow compared to before. There was some bad weather a few weeks ago that may have caused the problems I am having.  

I have the one R510 Unleashed and ICX 7150-2X1G switch. Can you assist me? 

[pinky_ruckus]

Hello @dewell_fears ,

Greetings!

Thank you for sharing the information.

I would suggest you to upgrade the firmware of the Switch since the Switch is on the older version.

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to upgrade the Switch firmware version to the recommended stable version.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-upgrade-RUCKUS-ICX-71...

Note: Please ignore 8080f from the guide and directly upgrade to the 8095g(recommended version)

Please follow the article and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.