Having connectivity issues with my ICX-7150 and APs (Lennar home). Connection is very spotty and slow (keeps dropping randomly). Have been reading through the forum for similar issues and seems it could be caused by a routing issue that could occur after a power outage. Already attempted to reset the switch and also unplug/reconnect.
Websites not loading Devices getting disconnected randomly Devices often not being able to connect to internet
Tried to access the switch via the web browser but no username/PW combinations seem to work. Need some help on next steps to find correct switch IP address, log in, etc., please advise thank you.
Possible passwords and username for ssh / access username : admin password : Lennar / username : admin password : Ruckus! / username : admin password : Ruckus1/ username : super password : sp-admin
Also Try Telnet option
If you can access to the Command line should look like this:
3-Here is a quick guide to understand how to fix the 'routing code issue' but basically you need only need to run the following commands once you are on the command line 'CLI'
Note: Hit Enter to accept each command
copy flash flash secondary
boot system flash secondary yes
ICX7150-24P Router>enable (hit enter to accept the command) ICX7150-24P Router#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished ) ICX7150-24P Router#boot system flash secondary yes ( hit enter to accept the command : the switch will reboot )
How to Fix Routing code issues on Lennar Home users via CLI
4-If the access via IP address is not possible here is a guide how to access to the Switch via console (cable access between your PC to the ICX 7150-C12P) in this case we need a USB type C to USB standard or Console cable Rj45 to USB.