01-18-2023 03:51 PM
I’ve been renting an eero from Hotwire and just bought my own. I switched it out and followed the steps and set up correctly (confirmed by eero tech support). Now when I connect to the ruckus, internet goes in and out, mostly out. How do I complete the ruckus setup?
01-19-2023 08:13 AM
Hi @Derekrosee
Based on your description, the issue occurs because the switch is stuck in boot mode.
1-Please try to disconnect from the Power outlet the ICX- 7150 and reconnect it.
2-Please try to press the reset button using a paper click or a small stick
Video link:https://www.youtube.com/watch?v=6jHMTdo_hK4
If this step doesn't work, we need to perform a software recovery.
Here is the quick guide to perform software recovery.
How to perform a Software recovery on an ICX7150 switch
Ruckus ICX Recovery Load boot code from boot monitor
https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s
Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive
Best regards,
Jayavidhya
Lennar Home Community