cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot log in to Switch to Fix Routin code issues on Lennar Home

HelpMePlease
New Contributor

I recently had a power outage and now my Switch is in Router mode. I followed the instructions at the below site and I was able to get the IP Address of my Switch (Router) but none of the login combinations work. Any idea of an alternative?

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issu...

6 REPLIES 6

Rock1
New Contributor

Refer to my post (ID= Rock1) from today (06-Jul-2023). If you know the IP address of the device and use telnet, then you might have similar success in getting the device to revert to Switch mode.

Hi @HelpMePlease 

 

Greetings of the day,

 

Please try the most common username and passwords ( This is key sensitive so please include capital letters )  

Username:admin password: Ruckus! 

Username:admin password: Ruckus1

Username:admin password: Lennar

Username:super password: sp-admin

 

Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-password...

 

Best regards,

Jayavidhya

Lennar Home Community

None of those passwords work.  I am trying to SSH (using a mac) into the switch.  I get prompted with the message password.  I tried EVERY password you all suggested and it doesn't work.  How I am able to resolve this issue that it seems like alot of people are having??

mrq201
New Contributor

I think with Telnet, it doenst ask for a password.  I only have a mac so im forced to use SSH; however, it asks for a password so now im stuck.