After power outage, no power to unit or APs

[DaveU]

Have tried the steps in previous posts, and believe and RMA is the next step

[DaveU]

is this a normal view - it doesn't look like the same as what you mentioned above - thanks!

[DaveU]

login as: ssh admin@192.168.0.21

Please login: admin
Password:
Welcome to Ruckus Unleashed Network Command Line Interface
ruckus>

[Jayavidhya]

Hi @DaveU 

Based on your description it seems like you have entered into Access Points CLI. Please try to find the correct Ruckus IP address using the below link. 

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Device...

If you find any difficulties to find the IP address please share the screenshot of the image while scanning the IP using IP scanner.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

[DaveU]

looks like those were my two options

[DaveU]

if i log into the other address, this is what i see:

login as: ssh admin@192.168.0.20

Please login: admin
password :
Copyright(C) 2016 Ruckus Wireless, Inc. All Rights Reserved.

** Ruckus R510 Unleashed AP: 211809015146

Warning: AP is in Unleashed-Managed mode
Current or latest Unleashed: 192.168.0.21 / 8c:fe:74:02:10:e0
Any configuration changes made in CLI may conflict
with the Unleashed's management and
will cause undefined results.
rkscli: