Adding a Ruckus Access Point

[waverlygreen]

I would like to add a Ruckus access point to my Lennar home. I currently have two Ruckus R510's. To add a third Ruckus access point, would it have to be hardwired with an ethernet cable? It looks like both of the current access points connect to the main device by ethernet.

Thanks.

Waverly Green

[Imran_ruckus]

Hi @waverlygreen 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

[Imran_ruckus]

Hi @waverlygreen 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

[waverlygreen · Accepted solution]

Issue resolved. Thanks.

[Imran_ruckus]

Hi @waverlygreen 

Thank you for the response.

Great!!! Good to know that the issue is now resolved. 

We appreciate your time and patience on this case.

Could you please confirm, if the videos were helpful and if you followed the same with a working mesh network? Please confirm.

Thank you again for contacting RUCKUS Lennar Home Community and feel free to contact us for future queries.

Have a great day ahead!!!

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[Imran_ruckus]

Hi @waverlygreen 

Thank you for the response.

Great!!! Good to know that the issue is now resolved. 

We appreciate your time and patience on this case.

Could you please confirm, if the videos were helpful and if you followed the same with a working mesh network? Please confirm.

Thank you again for contacting RUCKUS Lennar Home Community and feel free to contact us for future queries.

Have a great day ahead!!!

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.