Please I need assistance with my wireless access points again. I was having some latency issue with my internet so, to troubleshoot, AT&T suggested unplugging Ruckus to use their wifi gateway. After establishing that Ruckus might be the cause every attempt to get it back on has failed. I have read of a similar situation posted today and I tried the reboot process but it didn't work. The devices are not getting any power whatsoever. Please any assistance would be appreciated. FYI, I have attempted to troubleshoot based on the instructions given to @RobertU @ by@Imran_ruckus with similar issue. It is not working.
Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.
1.Upgrade a Switch ICX-7150-C12P using a USB flash drive