Access Points no longer working.

[ah07]

Hello,

I need some help troubleshooting my access points that are no longer working. Wifi has become slow and in some places throughout the house non existent. 

Product Name: 12-PRT POE+ COMP 2X1G SFP+

Product Family: ICX Switches

Product Code Part: C12P

[ah07]

*phew* Ok! I was able to get this going but now I'm stuck

When I completed "boot system flash primary" I got the above error and now I'm disconnected. 

What are my next steps?

Thank you

[ah07]

This is the full screen...

[ah07]

Also! I tried to update via Option 1 but I do not have a large enough flash drive. I then tried option 3 but the files that are being downloaded for the update are completely different from option 1 and 2. Which means the commands are different. There is no boot command in option 3, but there is for option 1 and 2.It looks like option 3 is updating with this file 08090k. Where as option 1 and 2 are updating with these files 8095h and 8080f. So which one is correct?

[Imran_ruckus]

Hi @ah07 

Greetings!!!

Thank you for the response and the update.

I see from the screenshot Primary partition on the Switch has been upgraded to the suggested version. Please enter ‘y’ (refer to the below screenshot) to reboot the primary partition and once it comes online enter the next commands mentioned below.

Please Enter the below commands after primary reboots:

Note: Hit Enter to accept each command 

enable

copy flash flash secondary 

Example: 

VIDEO LINK AS REFERENCE: https://www.youtube.com/watch?v=Eem1IBgYaWc

ICX7150-24P Router>enable (hit enter to accept the command) 
ICX7150-24P Router#copy flash flash secondary (hit enter to accept the command and wait: until the flash finished) 

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

[ah07]

I can no longer hit "Y". When I got to this point the program froze and I got an error and could not move forward. (See post from 11-28-2023 01:20 PM for the picture). How can I get the primary to reboot? 

Thank you