I've connected some (17) Ubiquiti WAPs to an ICX7150-ZP48.
some WAPs arent loading (all connected with direct patch cables in the lab).
it seems to be randomly not always the same WAP.
"sh inline power" output shows this error"
illegal class reported by PD
all WAP are the same model (ubiquitin AC-Lite) and have the same firmware.
it doesn't seem that the switch has any power capacity issues.
I've tried different POE configurations:
"inline power power-limit 8000" (up to 20000)
"inline power power-by-clas 3" (and 4)
and just "inline power"
the switch version is SPS08095d and the POE firmware is 02.1.8 Build 004.
any idea what happing here?
@zadok_ahiya Right. 6.5W should be no problem, so there may be something else going on. It looks like maybe that model is expecting passive POE. I see there are Ubiquiti adapters for that, but I would have to defer to Ubiquiti. I would recommend opening a case with them and asking about active/passive POE for this specific AP model. They should know if a switch is compatible or if it needs an adapter to work.