I configured two switches (ICX7150-24) in my smartzone 144 via putty. From both switches, i can ping the smartzone, but not the other switch, even though they are connected with a DAC cable and a LWL cable.How can I ping one switch from the other? I ...
Hello,I'm trying to gain access to my ruckus switch via CLI, and I'm getting the following error: CLI_SHELL_FAILED: SCP_HDLR-TASK ITC_INIT, ITC_ERR[27]I'm currently on build: 09.0.10eT211. Switch: 7150 24P. Anyone else experiencing this?
Hi Pack,I need to monitor 4 servers and 2 firewall/routers, what makes 8 seperate ports (SFP+, 10G each) for the server hosts and 2 LACP with 2x 10G SFP+ per LACP for the firewalls > so I need to monitor 12x 10G ports. These 12 ports are divided over...
Hello, I am having troubles in upgrading my ICX7250 L3 premium via TFTP.My ICX has two VRFs: SSH@MY-ICX>show vrf detailTotal number of VRFs configured: 2VRF VRF-DATA, default RD 10.1.255.1:200, Table ID 1IP Router-Id: 10.1.255.200Interfaces:ve100 ve1...
The power was turned off and then on. After that there is no home internet. Unsure if the ICX switch is working properly. The access points do not have any lights on - signaling they are not getting any power via the PoE maybe?The ICX7150 C12p switch...
