ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

RUCKUS ICX Switch Licensing

The following list are our most popular Knowledge Base Articles (KBA) for ICX Licensing. ICX 7150 License UpgradeICX License Install InstructionsPoD licenses for ICX 6610, ICX 6450,ICX 7150, ICX 7250ICX Licensed Features and Platform SupportActivatin...

Icx 7150 console login

Hi, I did a hard reset on my icx switch and I am trying to update the firmware so it can be on the unleashed network.  I am using mobaxterm and when I did the reset it showed it starting up. The console won't let me type anything unless I do user acc...

kindlord by New Contributor
  • 1 replies
  • 0 kudos

Resolved! FastIron 09.0.10e Multicast documentation wrong

The default for Flooding of Unregistered IPv4 Multicast Frames changed from enabled to disabled between 8.0.95 and 9.0.*, and the documentation page title does not accurately reflect that change.8.0.95 Disabling the Flooding of Unregistered IPv4 Mult...

vesalius by Contributor
  • 1 replies
  • 0 kudos

Show running interface configuration

Hi All,I am new to the Ruckus ICX Switches. How do I check the configured interface? Like Cisco products, allow the user to see the interface configuration e,g "show run config int gi 1/1/1 ".Do we have the same feature for ruckus? I would like to us...

Screenshot 2023-02-08 at 12.53.57 PM.png
Ameer by New Contributor
  • 6 replies
  • 0 kudos

Two ICX7150 Stacked with Strange Route Behaviour Overnight

 Have two ICX7150 stacked and use the latest Router firmware.Stacked with two SPF+ 10G cable. With default settings since I still not figure out how to access the Web interface to manage.Then I have a UXG-Pro as Gateway and DHCP Server, connected by ...

Eric by New Contributor
  • 2 replies
  • 0 kudos

Switch ICX750 slow after power outage

Same problem as everyone else when the power goes out. Switch is making everything very slow to the point where nothing or barely works. I am not saavy enough to plug into the switch and start entering code.

Eddie by New Contributor II
  • 2 replies
  • 0 kudos

Welcome to RUCKUS Community!

Please be sure to read the Community Guidelines before posting.

Coming Soon

We're in the planning stages for a number of improvements to our Community, including badges, contests, UX refresh and other enhancements.