ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! ACL Adding a access-group to a interface not selectable ??

Hello,  I believe this to be a CLI command line bug.I have done this before successfully but can't remember how you do this Config:ip access-list extended 100remark Block_CapWapsequence 10 deny udp any any eq 5246sequence 20 deny udp any any eq 5247s...

JayWM by New Contributor
  • 400 Views
  • 3 replies
  • 0 kudos

2 x 40G LAG on ICX7550 100G ports not allowed?

Hi,Yesterday I was trying to configure a LACP connection using two QSFP+ DAC cables between a Brocade VDX 6740 and an ICX-7550-24ZP. The VDX was no issue to configure, but on the ICX I ran into issues specifying the port-speed. I disabled stacking on...

zotacno by New Contributor
  • 400 Views
  • 2 replies
  • 0 kudos

SSH unattended commands & ssh certificate login

I figured how to send commands to an ICX switch directly from the SSH command. Like so from Powershell on a Windows System:"conf tenable acl-per-port-per-vlan" | ssh user@switchHowever I don't get any output from the switch, so I can't see the result...

blanalex by New Contributor II
  • 161 Views
  • 0 replies
  • 1 kudos

Resolved! Unleashed portal conflicting with switch web interface

Hi everyone,I have a ICX7150-C12 with two APs (via DHCP) that is connected to a pfsense router.The router has the IP 10.23.1.1 and the switch shows the IP 10.23.1.2 when I log in via the console port. In unleashed the switch is shown as 10.23.10.2. E...