ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ICX 7450-24 unable to use both 40g ports as uplink ports

I have ICX 7450-24 updated to 09.0.10hT211 and I am unable to use both 40g ports at the same time to connect to two different TrueNAS servers.  It does not matter which cable I use on which 40g port I use.  First cable plugged in wins and that server...

glydeon by New Contributor II
  • 2299 Views
  • 11 replies
  • 0 kudos

ICX6610-24P-E - Disable Jumbo Frame on Interface

Just purchased as an upgrade for my home lab a pair of ICX6610-24P-E so I can get my four Esxi HCI nodes and NAS  on dual 10Gb.ver 08.0.30uT7f3 Cool.. all working.  But...   VMWare vSAN / Nutanix require jumbo frames. But  I have an ongoing issue wit...

ICX MAC auth for Dynamic VLAN without RADIUS

I saw this article and it appears the commands are in version 10, but they're not found.   mac-auth auth-filter is an interface command in the documentation, but there's no documented way to create MAC filters, only ACLs.  When you try to enter eithe...

No POE power for ICX7150

Switch/Hub ICX 7150 C12P has LED's SYST orange & PWR LED green. No other LED's on. Status area no LED's lights on for STAT, SPD, ID or PoE. Long press reset. No output coming from any of the ports. Not able to open Unleashed Home. Can't open Typical ...

Announcements

Welcome to RUCKUS Community!

Please be sure to read the Community Guidelines before posting.

Please visit the Help FAQs if you are new!

Lennar SmartHome Customers

Please visit our Lennar Knowledge Base for quick answers to common issues before posting to the forum.