ICX Switches
The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Broadcast limiting vs an unmanaged switch with a loop

I'm working with a 7150-24 port switch in a test environment.I'm looking at how to address potential loops for connected un-managed switches - good or bad, I have to deal with this ugly reality.  While loop-detection DOES work, the affected port does...

VLAN to VLAN communication tagged ports

I want VLAN 102 to communicate w/ VLAN 220 all ports are tagged to each vlan. Each VLAN has ve. All VLANS are on the same stack. 1) do I need to configure the vlan tag on the hosts connected to these vlans? ESXi,VMs, printers, ip Phones.2) do I have ...

ICX multiple interfaces to default route

3 switch stack. Using 1/2/1 2/2/1 3/2/1 SFPs as uplinks to firewall. Trying to figure out best way or any way to get all my internet traffic out to any of those ports. I can map a single destination network to mult int's and the switch can do a littl...

Can Ruckus ICX 7150-C12P act as a router and do NAT?

I have a new Ruckus ICX 7150-C12P switch. I’m wondering if I can connect it directly to my ISP’s modem and let it act both as a DHCP server for my devices inside my home and also do the routing/NAT from internal network to the single external IP it g...

giri_alwar by New Contributor II
  • 5100 Views
  • 8 replies
  • 1 kudos
Announcements

Welcome to RUCKUS Community!

Please be sure to read the Community Guidelines before posting.

Please visit the Help FAQs if you are new!

Lennar SmartHome Customers

Please visit our Lennar Knowledge Base for quick answers to common issues before posting to the forum.

Top Kudoed Authors