CommScope RUCKUS Community Forums

ICX 6450 Can't Login after enabling FIPS mode

After enabling FIPS mode on a ICX 6450-24, I am unable to login through the console following reload.  Console history review showed that the user account was deleted from the config after issuing the fips enable command in global config.  There was ...

ICX7750 route-map help

Currently we are using a Cisco for our core switch, and we are trying to migrate over to a ICX7750. On the Cisco it allows a vlan interface to have an ACL, and a route-map applied to it, but I am unable to configure the ICX to do the same thing, it t...

ICX MAC based dynamic vlan assignment without radius

ICX7150 SPS08080dI'm trying to assign some intercom devices to VLAN 15 based on a MAC range.Looks like I'm supposed to enable 802.1x, then use an authentication and mac filter to assign the vlan-id for dynamic assignment. I'm just getting a little ...

How to configure İcx 7750 ports breakout

Which ICX Release is Suggested?

For the ICX 7xxx series, which release is suggested?Should we be sticking with 08.0.80 builds (i.e. upgrading from 08.0.80d to 08.0.80e)or is it preferred to jump to 08.0.90 builds (i.e. upgrading from 08.0.80d to 08.0.90b)Please let me know what Ruc...