RUCKUS ICX Switch Family

Ruckus Wireless

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

ICX 7150-C12 Updates cause broken sectors.

I'm trying to update an ICX7150-C12 with a newer firmware. It's currently running 8.0.61a, and I am aware upgrading past this requires that you load both the firmware & the eUFI image, which I have done. I can get the switch to update (on the Secon...

brocade WS-C3850 stp-bpdu-guard

I have the stp-bpdu-guard command on each of my ports. I want the individual port to shut down if it senses a loop, not the layer3 up-link (Cisco) which err-disables it's port, making the switch inaccessible. What commands do I need to add to accom...

We lost power and stack rebooted into Layer 3 mode. How to revert to layer 2 and retain configs?

Good day,We lost power to our switching rack several days ago and our UPS batteries also depleted, so all the switches rebooted when the power came back on. To my surprise they came back up in layer 3 mode, and I can no longer access the GUI or CLI ...

Help with setting up VLAN trunk ports on ICX switches - is this possible?

I have several Ruckus ICX7150-12P switches, running 08.0.92d (SPR08092d.bin).Our router is a pfSense.I'm trying to setup trunk ports to act as uplink ports between the ICX switches.I'm normally used to Cisco/Arista, and their concept of access/trunk ...

Switch can't load image after reset

After factory reset via reset button, switch lists out the following:Ruckus Wireless Bootloader: 10.1.15T225 (Jan 30 2019 - 23:08:47 -0800)Booted from partition 1DRAM: Validate Shmoo parameters stored in flash ..... OKICX7150-12 (POE), PVT1SYS CPLD ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1