Working on what should be a very straight forward task but becoming a nightmare. We have some ICX-7450 stacks (a 2x and 5x member stack). The task is to upgrade from 08.0.30t to 08.0.90a. Thought was to tftp the 08.0.90a code to the secondary alo...
we upload -2X10G-LIC-POD , Before we installed two 10G license and activated only one port.. now we are not able to activate the second port. kindly support us
I need to check the load balancing mode of the lags on the physical switches (ICX6610, 08.0.30t) facing our esxi cluster. On the cluster side, at the virtual switches, the balancing mode is currently "Source and destination IP address". The manual is...
I have a switch ICX7150-C12P. my staff deleted image so switch could not work nowAnybody can help me to fix it please???
Hi,I want set port on ICX7450-24 to dual mode via snmpMy request snmpset -v2c -c community 192.168.1.30 1.3.6.1.4.1.1991.1.1.3.2.6.1.3.192.23 i 4 1.3.6.1.4.1.1991.1.1.3.3.5.1.4.23 i 1 1.3.6.1.4.1.1991.1.1.3.3.5.1.24.23 i 192But i got error like Error...
