RUCKUS ICX Switch Family

Ruckus Wireless

|

ICX Switches

The RUCKUS ICX® Campus Switch family delivers a complete, scalable, and high-performance routing and switching solution that supports today’s demanding network applications.

Forum Posts

Sorted by:

ASK the Pack

Resolved! ICX 7150 VLAN 1

Hi, I'm new to icx's. I have a 7150-24P. I'm trying to configure ethernet 1/1/24 as the uplink port so I tagged in all vlans except vlan1 (default vlan, which I don't use). When I run sh runn this is showing on vlan 1, is this normal or is there som...

Uplink goes down when AP plugged into switch

New to Ruckus switches. Have an ICX 7650 with one uplink to an Extreme switch. ICX is managed by a SZ100. When I plug in a Ruckus R650 to a port on the ICX switch, 1 gig or 2.5 gig port, the uplink port goes down. Show Interface says port 1/2/1 is...

VLAN 1 is not working on stack mode

Dear All, First off please excuses me English isn't my native language. We have two of Brocade ICX7250-48P stacked, the idea behind is to accomplish a failover , whenever switch one is down we will remain online because each server will have two port...

ICX7150-C12-Switch admin username and password

Hi, I am 100% new to this and don't know much so bare with me. On the unleashed dashboard it shows I can add my switch to it. ive also noticed I needed to upgrade my firmware to 08.0.90 or later. "was running 08.0.80(something). I upgraded the boot...

ICX7250P POE Daughterboard Replacement?

HiI have obtained a ICX7250P with 08.0.95ba Firmware The switch works normally, but the POE Module Reports:- Severe Error - Module Failed to Init. I have reloaded the Boot, Image and POE Firmware with no effect. The switch works normally, the POE ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

2

1

1

1

1