CommScope RUCKUS Community Forums

bharat_gole · 01-30-2023

Hi experts,I am currently using 18 APs of R610, controlled by Zonedirector 1200 and current software Version:10.5.1.0 build 193. we facing issue of RTO on the zone director IP address . I always get simultaneously RTO on the Zone director and same ti...

bharat_gole · 10-20-2022

Hi Expert's,we have facing packet lost issue on the one Port no 1/1/4 on ICX 7450 L3 Switch ,which we have connected Wi-Fi Zone Director 1200.Please check log below and let us know how to resolved.SW: Version 09.0.00T213SSH@Quest_L3_SW_ICX7450# sh in...

bharat_gole · 03-15-2022

Hi expert,Please let us know how to resolve this newly arrived issue..while we try to SSH/Console login in ICX7450 Switch, error come up- User password expired, contact admin.Logs >>>Ruckus-ICX login: ...........Password: ............Quest_L3_SW_ICX...

bharat_gole · 08-12-2021

hi Team, i am using ICX7450 switch with L3 feature. now before start the upgradation i am using the below version. SPR08090d.bin (UFI) SW: Version 08.0.90dT213 Compressed Secondary Boot Code size = 786944, Version:10.1.15T215 (spz10115) after i u...

bharat_gole · 08-03-2021

Hi Team, we have 100 Mbps ILL Link with 5 usable public IPs which is given by ISP. now ILL link has terminated in our firewall and we have used it. now my requirement is, we want to split bandwidth with two port in ICX switch. ILL link have termin...

bharat_gole · 11-16-2022

HI Benbeck,Thanks for reply.we already open this case. team is looking for that but no luck till now.we want to 9.x Firmware because of IP DHCP binding scalability has been enhanced to support up to 3000 clients & 8.x not supported.if you want the ca...

bharat_gole · 03-21-2022

Hi Orlando,thanks for revert.We are using VER 09.0.00t213 on the switch with L3 feature.I want to inform you that, we had got the access switch on HTTPS portal with the same user credentials.after the logged in https portal, I changed the password of...

bharat_gole · 08-13-2021

hi @mohammad_atmazih issue has been resolved. i have updated the both flash of primary and secondary up to date then issue has been resolved.. thank for your valuable support .

bharat_gole · 08-12-2021

@mohammad_atmazih when i boot secondary i was getting issue see my first post. that's the reason i boot primary for checking.

bharat_gole · 08-12-2021

@ben_beck yes you was right. now the released the 9.0.00 firmware on the 27th July 2021 and the IP DHCP Binding Scalability have upto 3000 in that firmware. Thank for your valuable support.

CommScope RUCKUS Community Forums

User Statistics

User Activity

getting Request time out on ruckus zonedirector ip address

packet Dropped issue on the port of ICX 7450 L3 switch

while login in ICX7450 Switch, error come up- User password expired, contact admin

new firmware 09.0.00 issue for upgradation

Split Internet bandwidth with two port

Re: packet Dropped issue on the port of ICX 7450 L3 switch

Re: while login in ICX7450 Switch, error come up- User password expired, contact admin

Re: new firmware 09.0.00 issue for upgradation

Re: new firmware 09.0.00 issue for upgradation

Re: Lease-binding database full, no empty entries found