09-12-2024 08:41 AM
Hello all,
I'm currently in the process of taking backups of each of our network switches, and I'm running into an issue with how they interact with my TFTP server. I'm using Tftpd64 on Windows 11, but I've also tried to use SolarWInds TFTP server. When I connect to almost any of my switches and run the following:
copy running-config tftp <server ip> <filename.txt>
The switch outputs:
Parameter Validation Successful
....File Upload Complete
And my TFTP server log reads:
Connection received from <switch IP> on port 36473 [12/09 10:26:58.411]
Write request for file <test1.txt>. Mode octet [12/09 10:26:58.412]
OACK: <blksize=8192,tsize=7521,> [12/09 10:26:58.415]
Using local port 56325 [12/09 10:26:58.415]
<test1.txt>: rcvd 0 blk, 0 bytes in 1 s. 0 blk resent [12/09 10:26:59.435]
It creates the file with the specified name, but the .txt file contains 0 bytes. I tried this on every single switch we have, and it only worked successfully on 4 of them, which tells me it's not likely an issue with the TFTP server or our firewall. I'm honestly not sure what to try next, so any help would be amazing.
09-13-2024 09:53 AM
Hi Kringnalda
Thank you for reaching us
Could you help me with below details
Also please run through the below article and check if it helps. The access to the below article would need you to login to the ruckus portal.
Thanks
09-13-2024 01:21 PM - edited 09-13-2024 01:22 PM
09-22-2024 07:23 AM
Hi Kringnalda
Thank you for reaching us
Thank you for your note. I am able to access the link, and below is the page that opens for me. Could you please let me know what page opens for you? You should be able to log in to the portal to access it.
Thanks