Showing results for 
Search instead for 
Did you mean: 

Ruckus ICX7150 C08 TFTP Upgrade

New Contributor III


I'm trying to upgrade the software from 08.0.91 to a newer version, however I'm having trouble doing so. I tried the copy command, but no luck. It's almost as if copy tftp isn't working for some strange reason. 

I figured the only option was TFTP, as this model doesn't have a USB port. But any ideas on how to proceed with this upgrade? Current output: 

SSH@ICX7150-C08P Switch#show ver
  Copyright (c) Ruckus Networks, Inc. All rights reserved.
    UNIT 1: compiled on Jun  6 2019 at 20:57:00 labeled as SPS08091
      (28774816 bytes) from Primary SPS08091.bin (Non-UFI)
        SW: Version 08.0.91T211
      Compressed Primary Boot Code size = 786944, Version:10.1.16T225 (mnz10116)
       Compiled on Sat May 25 10:09:26 2019

  HW: ICX7150-C08-POE
UNIT 1: SL 1: ICX7150-C08-2X1G POE 8-port Management Module
      Serial  #:FMF3845Q09R
      Software Package: BASE_SOFT_PACKAGE
      P-ASIC  0: type B160, rev 11  Chip BCM56160_B0
UNIT 1: SL 2: ICX7150-2x1GF 2-port 2G Module
 1000 MHz ARM processor ARMv7 88 MHz bus
 8192 KB boot flash memory
 2048 MB code flash memory
 1024 MB DRAM
STACKID 1  system uptime is 3 day(s) 35 minute(s) 51 second(s)
The system started at 00:16:17 GMT+00 Thu Jan 01 1970

The system : started=factory reset   reloaded=by "factory reset"

===============       WARNING: FI image is not booted from UFI!!!      ===============
======  Please download UFI image and reboot the system for full functionality  ======

copy tftp startup-config

doesn't seem to want to work either. are these commands available in the .92 version? 


New Contributor III

What error do you get from the console when you try and tftp?

your post doesn’t say anything about it. 

can you ping your tftp server?

@corey_costello it only states "Incomplete command." when entering the command. 

I can't ping the tftp server (not on the same network yet). 

@kristphr you have to put in the whole command. 

Do a “copy tftp ?” and you’ll see the options. 

it has to be on a network that can reach your tftp server. 

New Contributor III

You can also reference the upgrade guide for the complete commands required and options available for upgrading.

For example here is the 08.0.91 upgrade guide: