We have two Ruckus ICX 7250 Switches in Router Mode, which are stacked. Firmware version is SPR08030h.
Also we have already activated license ICX7250-10G-LIC-POD by RTU for Advanced Routing Features. Now we need 10G ports, and we are thinking to also activate RTU License for 10G ports. I have several questions regarding this activation:
1 - Do I need to restart switches after RTU will be activated?
2 - Will somehow new RTU license for 10G ports breaks already activated Advanced Routing Features?
Since you already have 2x10 license, you will need to buy/install the 8x10 license. You can do this in production. No need to restart. If further assistance is needed, please open a support case and we can help you out (see my signature).
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer support.ruckuswireless.com/contact-us
Index Lic Mode Lic Name Lid/Serial No Lic Type Status Lic Period Lic Capacity Stack unit 1: 1 Node Lock ICX7250-10G-LIC-POD fwlIN* Normal Active Unlimited 2 Stack unit 2: 1 Node Lock ICX7250-10G-LIC-POD fwlIN* Normal Active Unlimited 2