Configure Ports of ICX8200 in SmartZone v-SZe
Hey Folks,is there special trick configuring Ethernet Ports in SmartZone v-SZe Controller?When i select a Port and click "Configure" we always get this error: What I am missing?RegardsPeter
RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Forum Posts
Resolved! Output from MIB 1.3.6.1.2.1.2.2.1.2, ICX7550
Questions:Having two units in the stack, in output from snmpwalk query,We get .x.x.IfDescr.1Value = String Gigabit Ethernet 1/1/1further down in the output:We get .x.x.IfDescr.257Value = String Gigabit Ethernet 2/1/1Question is: Where is the re...
Resolved! BPDU Errors
Hi,I have an ICX edge switch connected to Core using 802.1w. I need to uplink another extreme switch to the existing ICX edge switch. Vlan 900 is configured on the extreme switch this vlan has configured with spanning-tree 802.1w and stp for point ...
Ruckus to HP switch
hi network master's, just had a unexpected issue here, im running 3 icx switch. L3 and two L2 unfortunately and strange reason my L2 went down for good as a temporay solution i used our old HP switch as L2 switch. my problem is im am not really famil...
Resolved! Stacking ICX8200 with ICX7150
HelloIs it possible to stack mix models, ICX8200 with ICX7150 ?
Related Self-Help
