This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject

 

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

 

Ruckus Wireless
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Ruckus ICX 7250 RTU License

Go to solution
irakli_gvishian
New Contributor III

‎10-21-2022 12:34 AM

Hello,

We have two Ruckus ICX 7250 Switches in Router Mode, which are stacked. Firmware version is SPR08030h. 

Also we have already activated license ICX7250-10G-LIC-POD by RTU for Advanced Routing Features. Now we need 10G ports, and we are thinking to also activate RTU License for 10G ports. I have several questions regarding this activation:

1 - Do I need to restart switches after RTU will be activated?

2 - Will somehow new RTU license for 10G ports breaks already activated Advanced Routing Features? 

0 Kudos
Reply
1 ACCEPTED SOLUTION

Go to solution
BenBeck
Moderator
Moderator
In response to irakli_gvishian

‎10-28-2022 05:12 AM - edited ‎10-28-2022 05:13 AM

Please see the last section  here:

https://docs.commscope.com/bundle/fastiron-08095-licenseguide/page/GUID-5158A085-3C85-4EE3-BA59-CB73...

Since you already have 2x10 license, you will need to buy/install the 8x10 license. You can do this in production. No need to restart. If further assistance is needed, please open a support case and we can help you out (see my signature). 

 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

View solution in original post

Reply
9 REPLIES 9

Go to solution
BenBeck
Moderator
Moderator

‎10-21-2022 05:46 AM

What licenses are present in 'show license'? POD license will not affect adv routing license. 

From 8030 licensing guide:

BenBeck_0-1666356355480.png

 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us
0 Kudos
Reply

Go to solution
BenBeck
Moderator
Moderator
In response to BenBeck

‎10-21-2022 05:49 AM

Also, I should note licensing is much easier in newer code! You can check the 8090/8095 licensing guide if you are curious. You would need to upgrade to 8080f prior to jumping to the newest code. 

https://docs.commscope.com/bundle/fastiron-08095-licenseguide/page/GUID-5158A085-3C85-4EE3-BA59-CB73...

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us
0 Kudos
Reply

Go to solution
irakli_gvishian
New Contributor III

‎10-23-2022 11:43 PM

@BenBeck Thanks for your response.

There is result of Show license command:

Index Lic Mode Lic Name Lid/Serial No Lic Type Status Lic Period Lic Capacity
Stack unit 1:
1 Node Lock ICX7250-10G-LIC-POD fwlIN* Normal Active Unlimited 2
Stack unit 2:
1 Node Lock ICX7250-10G-LIC-POD fwlIN* Normal Active Unlimited 2

0 Kudos
Reply

Go to solution
irakli_gvishian
New Contributor III

‎10-28-2022 03:43 AM

Still waiting your help 

0 Kudos
Reply
Copyright © 2026 Khoros, LLC