ICX6430 uboot upgrade

[LeoLyu]

Dear support team

I got an ICX6430-C12P, the version is as below

XCAT2>> version

U-Boot 1.1.4 (Apr 24 2014 - 08:26:24) Marvell version: 5.3.4_0026-TINY
BC_PUGIO_H_1.1.4-X6 (Apr 24 2014 - 08:26:31)
CPLD version 0.0.1
PoE Software Version: 0e.0239.01

when I tried to upgrade the uboot with bubt command, it shows below error

XCAT2>> bubt u-boot.bin
Link Status Changed, Re-Negotiation Start
Using egiga0 device
TFTP from server 192.168.1.8; our IP address is 192.168.1.50
Download Filename 'u-boot.bin'.
Load address: 0x2000000
Download to address: 0x2000000
Loading: %T %######################################################
done
Bytes transferred = 786944 (c0200 hex)
Error! invalid image header ID

Could you please help to have a review and advice how to do the upgrade. If there is a upgrade guide, it will be perfect, Thanks. 

Regards 

[Chandini · Accepted solution]

Hi Team 

Ack. Regarding the ICX 6450, the software recovery procedure involves slightly different command steps as outlined in the official documentation.

You can refer to the upgrade guide linked below, specifically pages 37 and 38, for detailed instructions tailored to this model:

• https://support.ruckuswireless.com/documents/1496-fastiron-08-0-01-software-upgrade-guide

Thank you 

[Chandini · Accepted solution]

Hi Team 

Ack. Regarding the ICX 6450, the software recovery procedure involves slightly different command steps as outlined in the official documentation.

You can refer to the upgrade guide linked below, specifically pages 37 and 38, for detailed instructions tailored to this model:

• https://support.ruckuswireless.com/documents/1496-fastiron-08-0-01-software-upgrade-guide

Thank you 

[LeoLyu · Accepted solution]

Hi, Chandini 

Thanks a lot for your great support. 

regards,