Issue booting an ICX7150-12

[jpottsnpi]

Hello,

I am having an issue booting from the primary partition of my ICX7150

The following is a snippet of what happens when the primary partition begins to boot.

I can boot the secondary just fine by hitting 'b' and running the secondary partition.
I have tried following the steps to recover the partition via TFTP

Starting kernel ...

Mounting file system...
booting with 4.4 kernel
NAND Type: Micron NAND 2GiB (x 1)
PLATFORM MN
dd cmd: UBI
Config partition mounted
Resource partition is mounted!!
eUSB Not mounted or detected
Processing packages from primary partition
New packages found, uninstalling old packages if any..
UBIFS error (ubi0:0 pid 717): ubifs_check_node: bad magic 0x6501831, expected 0x                                                             6101831
UBIFS error (ubi0:0 pid 717): ubifs_check_node: bad node at LEB 86:754784
Not a node, first 24 bytes:
00000000: 31 18 50 06 f8 b7 48 db 04 23 18 00 00 00 00 00 a0 00 00 00 00 02 00 0                                                             0                          1.P...H..#..............
UBIFS error (ubi0:0 pid 717): ubifs_read_node: expected node type 0
UBIFS error (ubi0:0 pid 717): ubifs_iget: failed to read inode 6775, error -117
UBIFS error (ubi0:0 pid 717): ubifs_lookup: dead directory entry 'formparser.cpy                                                             thon-35.pyc', error -117
rm: can't stat '/.pkg/usr/lib/python3.7/site-packages/flask_packUBIFS error (ubi                                                             0:0 pid 717): ubifs_check_node: bad CRC: calculated 0xc3babc1a, read 0x7907b52f
age/werkzeug/__pycache__/formparser.cpython-35.pyc': Structure nUBIFS error (ubi                                                             0:0 pid 717): ubifs_check_node: bad node at LEB 86:754944
eeds cleaning
rm: can't remove '/.pkg/usr/lib/python3.7/site-pa       magic          0x6101831
ckages/flask_package/werkzeug/__pycache__/utils.cpython-35.pyc':        crc                                                                         0x7907b52f
 Read-only file system
rm: can't remove '/.pkg/usr/lib/python3.        node_type      0 (inode node)
7/site-packages/flask_package/werkzeug/__pycache__/routing.cpyth        group_ty 

[Imran_ruckus]

Hi @jpottsnpi 
Greetings!!!

Thank you for reaching out to the RUCKUS Community Forums.

Could you please confirm if this inquiry is related to a RUCKUS setup in a Lennar Home?

Looking forward to your response.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[Imran_ruckus]

Hi @jpottsnpi 
Greetings!!!

Thank you for reaching out to the RUCKUS Community Forums.

Could you please confirm if this inquiry is related to a RUCKUS setup in a Lennar Home?

Looking forward to your response.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

[Imran_ruckus]

Hi @jpottsnpi 

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support