01-04-2021 12:50 PM
I am new to working with Ruckus switches. We purchased one and I am trying it out as well as it's features. I enabled fanless mode and am wondering if there is a command to disable it without factory defaulting the switch. Any advice is appreciated.
01-04-2021 12:53 PM
Hey Luke,
You should just need to issue "no chassis fanless-mode-enable <unit-id/all>" from global config (conf t) mode:
01-04-2021 12:59 PM
Thanks Ben! It ended up being "no chassis fanless all" I know I could replace "all" with the device DECIMAL, but this switch is stand alone so I took the easy way.
01-04-2021 01:13 PM
You probably know this... but also a write mem or copy start run.