This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject

 

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

 

Ruckus Wireless
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

How do you disable fanless mode on a ICX 7150?

Anonymous
Not applicable

‎01-04-2021 12:50 PM

I am new to working with Ruckus switches.  We purchased one and I am trying it out as well as it's features.  I enabled fanless mode and am wondering if there is a command to disable it without factory defaulting the switch.  Any advice is appreciated.

0 Kudos
Reply
3 REPLIES 3

BenBeck
Moderator
Moderator

‎01-04-2021 12:53 PM

Hey Luke, 

You should just need to issue "no chassis fanless-mode-enable <unit-id/all>" from global config (conf t) mode:

http://docs.ruckuswireless.com/fastiron/08.0.60/fastiron-08060-commandref/GUID-28081659-1C19-4393-90...

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us
Reply

Anonymous
Not applicable
In response to BenBeck

‎01-04-2021 12:59 PM

Thanks Ben!  It ended up being "no chassis fanless all"  I know I could replace "all" with the device DECIMAL, but this switch is stand alone so I took the easy way.

Reply

Anonymous
Not applicable

‎01-04-2021 01:13 PM

You probably know this... but also a write mem or copy start run.

0 Kudos
Reply
Copyright © 2026 Khoros, LLC