Showing results for 
Search instead for 
Did you mean: 

Help: Log Into ICX-7150C12

New Contributor


I attempted to set a password on the switch by using the CLI connection on a Mac, but for some reason, I can't make the password update stick nor am I able to login when accessing the switch IP address on a web page. Any suggestions? Current firmware is 08.0.70bT211

Here is where I am at within Terminal:

"ICX7150-C12 Switch>

  enable            Enter Privileged mode

  nslookup          Nslookup Utility

  ping              Ping IP node

  show              Display system information

  stop-traceroute   Stop current TraceRoute

  traceroute        TraceRoute to IP Node

ICX7150-C12 Switch>enable

No password has been assigned yet...

ICX7150-C12 Switch#"


New Contributor

I solved the issue by following steps 1,3, and 4 of the linked site: Next topic, what guide may I follow to update the firmware on the switch?

RUCKUS Team Member

Hi Gordo_GT,


Since you're currently on 8070b, you will have to perform a step upgrade. You can follow below document: