Don't see active telnet or SSH sessions

[frnkblk]

Why don't I see my telnet and SSH sessions showing here?

telnet@router#show telnet
Telnet server status: Enabled
Telnet connections:
telnet@router#show ip ssh sessions
SSH server status: Enabled
SSH connections:
SSH connections (inbound):
SSH connections (outbound):
telnet@router#show manager sessions
SSH connections:
SSH connections (inbound):
SSH connections (outbound):
telnet@router#

I do see them here:
telnet@router#show ip tcp connections
Total 11 TCP connections
LISTEN: 7; SYN-SENT: 0; SYN-RECEIVED 0; ESTABLISHED: 4; FIN-WAIT-1: 0
FIN-WAIT-2: 0; CLOSE-WAIT: 0; LAST-ACK 0; CLOSING: 0; TIME-WAIT: 0
Local IP address:port <-> Remote IP address:port TCP state RcvQue RxBuffe SendQue TxBuffe
0.0.0.0 22 0.0.0.0 0 LISTEN 0 0 0 0
0.0.0.0 179 0.0.0.0 0 LISTEN 0 0 0 0
0.0.0.0 443 0.0.0.0 0 LISTEN 0 0 0 0
0.0.0.0 447 0.0.0.0 0 LISTEN 0 0 0 0
0.0.0.0 448 0.0.0.0 0 LISTEN 0 0 0 0
0.0.0.0 8081 0.0.0.0 0 LISTEN 0 0 0 0
0.0.0.0 8444 0.0.0.0 0 LISTEN 0 0 0 0
192.168.x.y 23 192.168.x.y 50414 ESTABLISHED 2 0 0 0
207.32.x.y 22 199.120.x.y 60965 ESTABLISHED 0 0 0 0
207.32.x.y 8113 207.32.x.y 179 ESTABLISHED 0 0 0 0
207.32.x.y 179 207.32.x.y 43561 ESTABLISHED 0 0 0 0
telnet@router#

I'm running SPR09010f.bin on an ICX7450 stack.

[inphobia]

if 9 supports it:

sh who
(or for ssh "sh ip ssh sessions)

no idea for telnet, don't think i've used that the past 5 years or so

[jdryan]

Hi frnkblk,

With respect to the query, please do check once with "show who" command, that should list all ssh/telnet/console sessions to the unit.

Let us know if the same helps !

Regards,
Joshua

[frnkblk]

I can't log into the original router rihgt now, but when I do a "show who" on another 7450 running switch code (SPS09010c.bin) it doesn't work, either.

I'm SSH'd in via the mgmt port -- I see a logged in user on the serial port (that's fine), but not me on SSH

SSH@router>show who
Console connections (by unit number):
1 ESTABLISHED, user is admin
, privilege super-user
Telnet server status: Disabled
Telnet connections:
SSH server status: Enabled
SSH connections:
SSH connections (inbound):
SSH connections (outbound):
SSH@router>

[BenBeck]

Can you try 9010j_cd6? I would think we would have a ton of cases if there was a blatant bug like this still out there. If you see it in 9010j_cd6, please open a case for a formal investigation.