RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Not enough power provided - it's capabilities are downgraded. We have an unleashed network with all R510's except for one R610. They are all plugged into POE only. We have switched out the cables with brand new 6a cables and it still says not ...
Looking to set up a configuration with two P300 root bridges connected to an icx7150 and two P300 non root bridges connected to an icx 7250 and utilizing link aggregation to provide more bandwidth. I found this reference on the ruckus site https://un...
Hi! i use only 2 AP in my home in Unleashed mode with last firmware - R710 and H510. Both wired to Netgear OClick power switch. r710 pared with short 1m cable. h510 cable is in wall ~5-10 meters. Once a week i have random reboot. My question is - ho...
Hello, I am having trouble to setup an access point that I have here. The AP is the Ruckus T310c. I have made an reset to factory setting by clicking for more than 4 seconds in the button right next the ethernet port. I had configured the PC ip ad...
