RUCKUS Indoor and Outdoor Access Points (APs)

|

Access Points - Indoor and Outdoor

RUCKUS Indoor, Outdoor, Bridge and Specialty Wi-Fi Access Points (APs)

Forum Posts

Sorted by:

ASK the Pack

T610 INSTALLATION HEIGHT

what would be an optimal height to have a t610 access point? the t610 is being used in a warehouse, and currently sits on a printer table about 2 feet off the ground, and there is a freezer wall across the access point. obviously the wall is causin...

Having unleashed AP on network pulls in AP already on controller?

We were trying to repurpose an old R710 to be a standalone at small location as unleashed. It was previously managed by our ZD1200 controller. While it was on the network it seemed to pull in several of our R550 that were configured to the ZD1200. Al...

Resolved! R710 will not join ZD

Hopefully, this won't be a "lesson" in "you get what you pay for." but here goes.I bought a few used R710's to add to our network. I've done this in the past and always had good results. I bought 10 this time from two different vendors. So far, on...

AP's events are showing that the AP never contacted to the cloud

AP's events are showing that the AP never contacted to the cloud irrespective of the fact that my AP's were working fine even prior to this event message.Kindly helpThankyou

Help configuring Ruckus for my home network.

All,Have had multiple issues with Cisco 9130 and Cisco switch. I am now running an ICX 7150-c12p and want to rollout two R650s eventually to cover my 1600 sqft home. It’s not too large but the master bedroom is on one end and is behind the oven hood ...

Related Self-Help

Find More Solutions

Top Kudoed Authors

User

Count

4

4

3

2

1

Labels