RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
08-23-2025 11:46 AM
I have a ruckus r500 running Ruckus ZoneFlex Solo Access Point 110.0.0.0.675 firmware.
It appears that it is continuously (every 2 seconds) trying to reach btjbnmmjh.com. I have reset the access point and it continued, I re-flashed the firmware, It continued. Even with the wifi turned off, it continued. It is definitely coming from the access point. If I unplug it it stops.
" Its web server is located in Ukraine, with IP address 45.10.88.2. According to SiteAdvisor, btjbnmmjh.com is very risky to visit. "
Any Ideas?
08-23-2025 01:33 PM
I flashed unleashed R500_200.7.10.202.121.bl7 to the ap and it is still trying to reach btjbnmmjh.com. It is now trying to reach captive.apple.com every 2 seconds. I found that that was a known bug that could be turned off but not in this version of firmware as there is not a internet-check option in config>system. I am confident that this access point will be smashed by a sledge hammer soon!
08-26-2025 03:15 AM
Hi Sunkool,
In 200.7 our APs were using captive.apple.com in order to determine internet reachability and this was resolved in Unleashed 200.13 though I don't see anything related to btjbnmmjh.com. Unfortunately since the R500 APs are EOL/EOS we can't work on a software fix for these models.
R500 went EOL in 2019.
Below is the R500 EOL/EOS policy :
https://support.ruckuswireless.com/documents/2455-ruckus-r500-ap-end-of-sales-eos-pre-announcement
Best Regards
Vineet
