Overlapped Subnet IP range

[petar_pisnjak]

I am having problem with Ruckus R710 Subnet configuration:

I have configured Local Subnet 1 with following:

Enabled
Local IP: 192.168.40.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.40.10
Maximum DHCP Users: 240
Access VLAN: 40


When I try to configure Local Subnet 2 with following:

Enabled
Local IP: 192.168.50.1
Mask: 255.255.255.0
DHCP: Enabled
Starting Address: 192.168.50.10
Maximum DHCP Users: 240
Access VLAN: 50

I get message: 
Overlapped Subnet IP range

But I cannot understand why would it be? I have even tried further spread subnets like: 192.169.50.1 or something else, but still get same message...

[martin_martin]

Hi Petar,

Which software are you running on the R710 ?

Kind regards
Martin

[petar_pisnjak]

Software Version: 100.2.0.0.336

[hussam_abuqamar]

I am having same issue; On contrary R700 is stable and allow me to do this.
I think this is a bug that has been for a while in R710 and not taken care of.

[antonio_s_bakmk]

do you solved this problem ?