Brand new ap (R720) running firmware 220.127.116.11.1412 with static ip address. I ssh to the ap and add the ip address to the controller and reboot. It connects to the controller and then goes offline. The ap is still pingable. I ran the command get scg and I received the following output.
rkscli: get scg ------ SCG Information ------ SCG Service is enabled. AP is managed by SCG. State: CONN_GET_ADDR_STATE Server List: 10.1.0.50, No SSH tunnel exists Failover List: Not found Failover Max Retry: 2 DHCP Opt43 Code: 6 Server List from DHCP (Opt43/Opt52): Not found SCG default URL: RuckusController SCG config|heartbeat intervals: 30|30 SCG gwloss|serverloss timeouts: 1800|7200 Controller Cert Validation : disable
I have enough license available for the ap. I have reset the ap various time and no luck.